Playing MDs

 

Editing Recorded MDs

 

 

 

 

 

 

 

 

 

 

 

 

Playing Using a Timer

A commercially available timer connected to the recorder allows it to start or stop playing at a preappointed time. For additional information, refer to the information manual for the timer.

1Turn on the timer.

2Perform steps 1 to 3 in “Playing an MD” (see page 8).

3Choose “Timer PLAY” from the Setup Menu.

1.While the recorder is stopped, press EDIT/NO twice to display “Setup Menu.”

2.Turn AMS until “Timer” appears in the display, then press AMS.

3.Turn AMS until “Timer PLAY” appears in the display, then press AMS.

4.Press EDIT/NO.

4Set the timer to the desired operation.

After Finishing Playing with a Timer

If you leave the setup Menu “Timer PLAY” setting, the recorder will begin playing automatically next time it is powered on. If you are not playing with a timer, choose “Timer OFF” from the Setup Menu.

Notes on Editing

You can edit the recorded tracks after recording, using the following functions:

Erase Function allows you to erase recorded tracks simply by specifying the corresponding track number.

Divide Function allows you to divide tracks at specified points so that you can quickly locate those points afterwards, using the AMS function.

Combine Function allows you to combine two consecutive tracks into one.

Move Function allows you to change the order of tracks by moving a specific track to a desired track position.

Title Function allows you to create titles for your recorded MDs and tracks.

If “Protected” appears in the display

The recorder could not edit because the record-protect slot on the MD is open. Edit after closing the slot (see page 7.)

When “TOC” indicator flashes in the display

Do not move the recorder or pull out the AC power cord. After editing, “TOC” indicator lights continuously until you eject the MD. “TOC” indicator flashes while the recorder is updating the TOC. When the recorder finishes updating the TOC, “TOC” indicator goes off.

Erasing Recordings

(Erase Function)

Follow the procedures below to erase:

A single track

All tracks

Part of a track

Note, however, that once erased, MD data cannot be recovered.

EDIT/NO YES

-AMS±

22