Additional Information

Undoing the Last Edit (Undo Function)

You can use the Undo Function to cancel the last edit and restore the contents of the MD to the condition that existed before editing was done. Note, however, that you cannot undo an edit if you do any of the following after the edit:

•Press the rbutton on the front panel.

•Press the rbutton, the MUSIC SYNC button, or the CD-SYNC STANDBY button on the remote.

•Turn off the power or eject the MD.

•Disconnect the AC power cord.

EDIT/NO YES

-AMS±

1While the recorder is stopped or during playback pause, press EDIT/NO to display “Edit Menu.”

2Turn AMS until “Undo?” appears in the display, then press AMS.

“Undo?” does not appear if no editing has been done.

One of the following messages appears in the display, depending on the type of editing to be undone:

Editing done:

Message:

 

 

Erasing a single track

“Erase Undo ?”

 

Erasing all tracks on an MD

 

 

 

Dividing a track

“Divide Undo ?”

 

 

Combining tracks

“Combine Undo”

 

 

Moving a track

“Move Undo ?”

 

 

Labeling a track or an MD

“Name Undo ?”

 

Changing an existing title

 

 

 

3Press YES again.

“Complete” appears for a few seconds and the contents of the MD are restored to the condition that existed before the edit.

To cancel the Undo Function

Press EDIT/NO or p.

Function of Control Terminal

Control terminal (CTRL-S)

Mini jack type

When a system controller with CTRL-S terminal is connected to the control terminal of this recorder, it can operate as a remote .

Control functions

The system controller which is connected to the control terminal operates the same as the supplied remote RM-D7M.

Note

When the system controller is connected to the control jack, the remote can not be used because its infrared rays are stopped.

29