Sony MDS-NT1 service manual Front Panel Section, BD BOARD, Over Write Head HR901

MDS-NT1

3-5. FRONT PANEL SECTION

4 two screws (BVTT3 ⋅ 5)

5front panel section

wire (flat type) (7 core)

Note: Set the wire (flat type) as illustrated, then install the front panel section.

	3 two screws
3-6. BD BOARD, OVER WRITE HEAD (HR901)	(K3 ⋅ 8)
Note: By means of removing 1 connector (CN104),
BD board can be removed without removing	2 screw (P1.7 ⋅ 6)
the over write head (HR901).

3 over write head (HR901)

Note: The over write head (HR901) should be handled with care as it is damaged easily.

4Remove four solders.

BD board (side B)

4Remove five solders.

5 two screws (PWH1.7 ⋅

1wire (flat type) (7 core) (CN104)

2lead wire

8BD board

6

1 connector (CN104)

7flexible board (CN101)

3.5)

16