6Connect the video input jack of your TV to the VIDEO OUT jack with the supplied video cable.

MONITOR

 

OUT

S VIDEO

 

(DVD

 

ONLY)

VIDEO

 

When using a TV

Turn on the TV and select the video input so that you can view the pictures from this system.

Tip

For even higher quality video images, you can use an optional S-video cable to connect the S VIDEO input jack on your TV to the S VIDEO OUT jack (DVD only).

7For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage.

Depending on the model, the VOLTAGE SELECTOR may differ.

VOLTAGE SELECTOR

120V* 220V 230-240V

* Saudi Arabian model: 120 – 127 V

8Connect the power cord to a wall outlet.

The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends.

If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter).

9(Except for Pan-American and European models)

Set the color system to PAL or NTSC depending on the color system of your TV.

The color system is factory set to NTSC for region code 3 models, and PAL for other region code models. Each time you perform the procedure below, the color system changes as follows:

NTSC yPAL

Use the buttons on the system.

1 Press ?/1 to turn off the system.

2 Press ?/1 while holding down X.

The system turns on and the color system is changed.

Notes

•You cannot set the color system in the Power Saving Mode.

•When you play back a VIDEO CD recorded in a different color system from the one you set to the unit, the picture image may be distorted.

To connect optional components

See page 61.

continued

Started Getting

13GB