5 Press v or V (or M or m on the remote) repeatedly, or press the number buttons to select the title, chapter, track, index or album number you want to search.
If you make a mistake
Press CLEAR on the remote to cancel the number, then select another number.
6 Press ENTER.
Playback starts from the selected number.
To search for a scene using the time code (Time Search)
1 In step 3, select “ TIME” .
“T **:**:**” (playing time of the current title) is displayed.
2 Press ENTER.
“ T **:**:**” changes to
3 Input the time code using the number buttons, then press ENTER.
For example, to find the scene at 2 hours, 10 minutes, and 20 seconds after the beginning, enter “ 2:10:20” .
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the Control Menu disappears.
Notes
•The displayed number of title, chapters, or tracks is the same number of title, chapters, or tracks recorded on the disc.
•You cannot perform Time Search during PBC playback of VIDEO CDs (see page 27).
Changing the angles
(DVD only)
If various angles
Use the remote for the operation.
1 Press DVD DISPLAY during play. The Control Menu appears.
2 Press M or m repeatedly to select “ ANGLE” .
The angle number appears. The number in parentheses indicates the total number of angles.
3 Press ENTER.
4 Select the angle you want using the number buttons or M/m, then press
ENTER.
The angle is changed to the selected angle.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the Control Menu disappears.
Tip
You can select the angle by pressing ANGLE. Each time you press the button, the angle changes.
Note
Depending on the DVD, you may not be able to change the angles even if
CD/CD/MP3 DVD/VIDEO