Inserting two R6 (size AA)
batteries into the remote
e
E E
e
Tip
With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.
Setting the clock
1 Press ?/1 to turn on the system.
2 Press CLOCK/TIMER SET on the remote.
3 Press M or m on the remote repeatedly to set the hour.
4 Press , on the remote.
The minute indication flashes.
5 Press M or m on the remote repeatedly to set the minute.
6 Press ENTER.
The clock starts working.
To adjust the clock
1Press CLOCK/TIMER SET on the remote.
2Press M or m on the remote repeatedly to select “CLOCK SET”, then press ENTER.
3Do the same procedures as step 3 to 6 above.
Note
The clock settings are canceled when you disconnect the power cord or if a power failure occurs.