Presetting radio stations (continued)

Other Operations

To

Do this

Tune in a station

Follow the procedure described in

with a weak

“ Setting presets through manual

signal

tuning” .

 

 

Set another

Start over from step 1. After step

station to an

3, press . or > (or PRESET

existing preset

–or + on the remote) repeatedly to

number

select the preset number you want

 

to store the other station.

 

 

To change the AM tuning interval (except for the European, Middle Eastern and Philippine models)

The AM tuning interval is factory-set to 9 kHz (10 kHz in some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding down ENTER, turn the system back on. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure.

Note

You cannot change the AM tuning interval in the Power Saving Mode.

Tips

•The preset stations are retained for half a day even if you disconnect the power cord or if a power failure occurs.

•To improve broadcast reception, reorient or move the supplied antenna near a window or outdoors.

Listening to the radio

You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.

Listening to a preset station

—Preset Tuning

Preset radio stations in the tuner’s memory first (see “ Presetting radio stations” on page 43).

1 Press TUNER/BAND repeatedly to select “ FM” or “ AM” .

2 Press . or > (or PRESET –or + on the remote) repeatedly to select the desired preset station.

Preset number

Frequency

 

 

 

 

44GB