xBALANCE
You can vary the balance of the left and right speakers as follows. Be sure to set “ TEST TONE” to “ ON” for easy adjustment.
The default settings are in parentheses.
•FRONT (0 step): Adjust the balance between the front left and right speakers (6 steps left or right).
•REAR (0 step)*: Adjust the balance between the rear left and right speakers (6 steps left or right).
* except for
xTEST TONE (except for
The speakers will emit a test tone to adjust “ BALANCE” and “ LEVEL” .
•OFF: The test tone is not emitted from the speakers.
•ON: The test tone is emitted from each speaker in sequence while adjusting balance or level. When you select one of the
“ SPEAKER SETUP” items, the test tone is emitted from both left and right speakers simultaneously.
Note
When you adjust the level of the sub woofer, set T.TONE to “ OFF” .
To adjust the volume of all the speakers at once
Turn VOLUME (or press VOL
Adjusting the speaker volume and level
Use the remote for the operation.
For
1 Press DVD SETUP in stop mode.
2 Press M or m repeatedly to select
“SPEAKER SETUP” , then press
ENTER.
3 Press M or m repeatedly to select “ TEST TONE” , then press ENTER.
4 Press M or m repeatedly to select “ ON” , then press ENTER.
You will hear the test tone from each speaker in sequence.
5 From your listening position, adjust the value of “ SIZE” , “ DISTANCE” ,
“BALANCE” and “ LEVEL” using M/m/
</,.
The test tone is emitted from both left and right speakers simultaneously.
6 Press ENTER when you finish adjusting.
7 Press M or m repeatedly to select “ TEST TONE” , then press ENTER.
8 Press M or m repeatedly to select “ OFF” , then press ENTER.
continued
CD/CD/MP3 DVD/VIDEO