Using the sub woofer
You can use the sound of the sub woofer to suit the sound source.
Press ON/OFF on the sub woofer.
The indicator lights up while the sub woofer turns on.
Press the button again to turn off the sub woofer.
Tip
You can use VOLUME (or VOL – or + on the remote) to adjust the volume of the sub woofer linked to the front speakers.
Selecting the surround
effect
Press SURROUND on the remote.
Each time you press the button, the display changes as follows:
VIRTUAL* t SURR ON t SURR OFF (off)
*“VIRTUAL” appears, but the sound field with virtual speaker effect is only reproduced for a 2ch source DVD.
Note
When you select other sound effects, the surround effect will be canceled.
Display
Turning off the display
— Power Saving Mode
The demonstration display (display window and buttons lighting and flashing even when the system power is off) and the clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode).
Press DISPLAY repeatedly while the system is off until the demonstration display or the clock display disappears.
To cancel the Power Saving Mode
Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows:
Demonstration display t Clock display* t No display (Power Saving Mode)
* The clock is displayed only if you set the clock.
Tips
•?/1 indicator lights up even in the Power Saving Mode.
•The timer continues to operate in Power Saving Mode.
Note
You cannot perform the following operations in Power Saving Mode.
—setting the clock
—changing the AM tuning interval (except for European, Middle Eastern and Philippine models)
—turning on the system by pressing the function buttons
—switching the MD (VIDEO) function
—changing the color system
Display