Sony MHC-RX100AV Presetting radio stations, Press TUNING MODE repeatedly to select “AUTO”

Note

When setting the time, set the equalizer display to anything other than Spectrum analyzer pattern 3 (See “To change the equalizer display” on page 34).

Step 4: Presetting radio stations

The 3 band model lets you preset up to 40 stations, 20 for FM, 10 for MW and 10 for LW.

The 4 band model lets you preset up to 45 stations, 20 for FM, 10 for MW, 10 for LW and 5 for UKV.

POWER 3,5	6 2 1 4
0 )	¹

¤ á¸

1 Press TUNER/BAND repeatedly until the band you want appears in the display.

The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can receive.

Every time you press this button, the band changes as follows:

3 band model:

FM nMW nLW n

4 band model:

FM nMW nLW nUKV* n

* “STEREO PLUS” is displayed when you select UKV.

2 Press TUNING MODE repeatedly to select “AUTO”.

3 Turn the jog dial.

The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo programme) appear.

TUNED

STEREO

VOLUME

AUTO

MHz

4 Press TUNER MEMORY.

A preset number appears in the display.

Preset number

TUNED

STEREO

VOLUME

AUTO

5 Turn the jog dial to select the preset number you want.

6 Press ENTER/NEXT.

The station is stored.

7 Repeat steps 1 to 6 to store other stations.

continued

9