Sony MHC-RX100AV Recording from the radio, 5 7 ¹, Press TUNER/BAND to select the band you want

Recording from the radio

You can record the radio programme on a tape by calling up a preset station. You can use TYPE I (normal) or TYPE II (CrO2) tapes. The recording level is automatically adjusted.

POWER	6 3	2	1
0	)	¹
		¤	á¸

¼	â	¼	â
» á	¹	¹	» á

¤ ¤

DOLBY NR 5 7 ¹ 4

1 Press TUNER/BAND to select the band you want.

2 Press TUNING MODE so that “PRESET” appears in the display.

3 Turn the jog dial to tune in a preset station.

Turn counter-			Turn clockwise
clockwise for			for higher
lower preset	–	+	preset numbers.
numbers.
Preset number			Frequency
			TUNED
			STEREO
			VOLUME
PRESET			MHz

4 Press ¤ EJECT and insert a blank tape into deck B.

With the side	â	¼
you want to		á »
record facing
forward
		¤

5 Press r.

Deck B stands by for recording.

6 Press DIRECTION repeatedly to select A to record on one side. Select a (or RELAY) to record on both sides.

7 Press ¸ on deck B.

Recording starts.

To stop recording

Press ¹ on deck B.

Tips

•If you want to record from the reverse side, press »so that »(for reverse side) lights up.

•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.

•To record non-preset stations, select “MANUAL” in step 2, then turn the jog dial to tune in the desired station.

• When you want to reduce the hiss noise in low- level high-frequency signals, press DOLBY NR so that “DOLBY NR B” appears after pressing r.

• If noise is heard while recording from the radio, move the respective aerial to reduce the noise.

18