Tip
You can place the components as described below. In this case, place the components first, then connect the components.
DVD/VIDEO CD/CD
Tunerplayer
Inserting two size AA (R6)
batteries into the remote
]
} }
]
Started Getting
A/V Amplifier | Cassette deck |
To attach the center and rear speaker pads
Attach the supplied center and rear speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping.
Notes
•Keep the speaker cords away from the antennas to prevent noise.
•Do not place the rear speakers on top of a TV. This may cause color distortion in the TV screen.
•Be sure to connect both left and right rear speakers. Otherwise, the sound will not be heard.
•When you play a VIDEO CD recorded in the different color system from the one you set to the system, the picture image may be distorted.
•The AC OUTLET on the A/V amplifier is for this system’s DVD/VIDEO CD/CD player only. Do not connect other component.
Operating a Sony TV
You can use the following buttons on the remote to operate a Sony TV.
To | Press |
Turn the TV on or off | TV ?/1. |
|
|
Switch the TV’s video input | TV/VIDEO. |
|
|
Change the TV channels | TV CH |
|
|
Adjusts the volume of the TV | TV VOL |
speaker(s) |
|
Tip
When the remote no longer operates the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.
Notice for carrying this system
Do the following to protect the DVD mechanism.
1Turn on the system, then turn FUNCTION to select “DVD”.
Make sure that all discs are removed from the unit.
2While holding down EQ ON/OFF, press
?/1 until “LOCK” appears.
3Release ?/1 first, then release EQ ON/ OFF.
4Unplug the AC power cord.
13