Recording to a tape (continued)
Recording a VIDEO CD/CD by specifying the track order
—Program Edit
When programming, make sure the playing times for each side do not exceed the length of one side of the tape.
1
2 When the playback is stopped, press PLAY MODE repeatedly until “PROGRAM” appears in the front panel display.
The Program Display appears on the screen.
PROGRAM |
|
| T |
|
| ||
|
|
| ALL |
ALL CLEAR |
|
1.– – – –
2.– – – –
3.– – – –
4.– – – –
5.– – – –
6.– – – –
3 Press ENTER (A/V amplifier or remote), then press O or o repeatedly to select the disc.
PROGRAM
3 : – – – – |
| T | |
|
|
|
|
ALL CLEAR |
| ALL | |
1. – – – – |
|
| |
2. – – – – |
|
| |
3. – – – – |
|
| |
4. – – – – |
|
| |
5. – – – – |
|
| |
6. – – – – |
|
| |
|
|
|
|
4 Press p.
The cursor moves to the track (in this case, “01”).
| Disc type* | Track | ||||
|
|
|
|
|
| |
PROGRAM |
| T | ||||
| 3 : CD |
|
| |||
|
|
|
|
|
|
|
| ALL CLEAR |
|
| ALL |
| |
| 1. – – – – |
|
| 01 |
| |
| 2. – – – – |
|
| 02 |
| |
| 3. – – – – | 03 |
| |||
| 4. – – – – | 04 |
| |||
| 5. – – – – | 05 |
| |||
6.– – – –
*“?” appears when the system has not loaded the disc
46 information in the memory.
Select the track you want to program.
For example, select track “02”.
Press O/o or the numeric buttons to select “02” under “T”, then press ENTER.
Selected track
PROGRAM | T |
ALL CLEAR | ALL |
1.CD – 02
2.– – – –
3.– – – –
4.– – – –
5.– – – –
6.– – – –
6 To program additional steps, repeat steps 3 to 5.
7 Press CD SYNC.
Deck B stands by for recording. To reduce the hiss noise in
8 Press DIRECTION repeatedly to select gto record on one side.
Select j(or RELAY) to record on both sides.
Press REC PAUSE/START.
Recording starts.
To cancel Program Edit
Press PLAY MODE repeatedly until “1 DISC” or “ALL DISCS” appears in the display.