Playing a disc (continued)
Other operations
To | Do this |
Stop playback | Press x (DVD/VIDEO CD/ |
| CD). The playback stops at the |
| point xis pressed (Resume |
| Play). Press xagain to cancel |
| the Resume Play (see page 30). |
|
|
Pause playback | Press X*1. |
| Press again to resume playback. |
|
|
Select a track or | During playback or pause, press |
chapter | > (or NEXT) (DVD/VIDEO |
| CD/CD) to go forward or . |
| (or PREV) (DVD/VIDEO CD/ |
| CD) to go backward. |
|
|
Find a point in | Press M or m(DVD/VIDEO |
a track title or | CD/CD) during playback. Each |
chapter | time you press the button, the |
(Lock | speed changes as follows: |
Search function) | 1 (slow) y 2 (faster than 1) |
| Press N SELECT to stop |
| searching at the desired point. |
|
|
Change the | During playback, press SLOW |
playback speed*2 | t or T*3 on the remote. Each |
time you press the button, the | |
| speed switches between two |
| slowed playback speeds. To |
| return to normal playback, press |
| N SELECT. |
|
|
Playing the disc | During playback, press STEP |
frame by frame | cor C*3 on the remote. |
changing the | Each time you press the button, |
playback speed*2 | playback is advanced a single |
(Freeze Frame) | frame in the desired direction. |
| To return to normal playback, |
| press NSELECT. |
|
|
Select a disc when | Press one of the DISC |
playback is stopped | buttons (or D.SKIP on the |
| remote). |
|
|
Switch to DVD | Press one of the DISC |
function from | buttons (Automatic Source |
another source | Selection). |
|
|
Remove the disc | Press one of the DISC |
| buttons. |
|
|
*1 There may be some disturbance in the video image.
*2 DVD and VIDEO CD only.
*3 SLOW tand STEP care not available during playback of VIDEO CDs.
Notes
•Depending on the DVD or VIDEO CD, some operations may be prohibited.
•VIDEO CDs cannot be viewed slowly or frame by frame in the reverse direction.
•Under the following circumstances, the sound field is automatically set to “2CH STEREO”.
–When recording.
–When TAPE B is in REC PAUSE mode.
–When recording using TAPE B.
•When using headphones, the sound from headphones is 2 channel.
•Switch the sound field to “2CH STEREO” when making an analog recording using a component connected to the MD OUT jacks on this unit. There is no audio output from the MD OUT jacks in the multi channel mode.
•Depending on the DVD, digital recording may not be done. In this case, perform analog recording. Turn FILE SELECT to select “2CH STEREO” when making an analog recording.
•Set the sound to “STEREO” using the AUDIO button when you play DTS sound tracks on a CD (page 34).
26