Speaker settings (continued)

Adjusting the speaker volume and level

1 When the playback is stopped, press DVD SET UP, then select “SPEAKER SETUP”.

2 Select “TEST TONE” and set “TEST TONE” to “ON”.

You will hear the test tone from each speaker in sequence.

3 From your listening position, select “BALANCE” or “LEVEL”, then press p or P repeatedly to adjust the value of “BALANCE”, or press o or O repeatedly to adjust the value of “LEVEL”.

The test tone is emitted from both left and right speakers simultaneously.

4 Select “TEST TONE” and set “TEST TONE” to “OFF” to turn off the test tone.

Notes

When you adjust the speaker settings, the sound cuts off for a moment.

If you adjust these parameters using OSD while adjusting the speaker parameters using SETUP menu, the display on the unit turns off.

24

MHC-S90D 4-235-983-13(2) GB