Multi channel surround
setup
For the best possible surround sound, all speakers should be the same distance from the listening position (A). However, this unit lets you to place the center speaker up to 1.5 meters closer (B) and the rear speakers up to
4.5meters closer (C) to the listening position. The front speakers can be placed from 1.0 to
12.0meters from the listening position (A).
You can place the rear speakers either behind you or to the side, depending on the shape of your room (etc.).
When placing rear speakers to your side
| B |
A | A |
| 45° |
C | C |
| 90° |
20°
When placing rear speakers behind you
B
A A
45°
C | C |
90°
20°
Note
Do not place the center speaker farther away from the listening position than the front speakers.
Specifying the speaker parameters
1
2 Press P or p repeatedly to select “SP. SET UP”.
3
4 Press P or p repeatedly to select the parameter you want to adjust.
See the table on page 73 for the speaker parameters.
5 Press O or o repeatedly to select the setting you want.
The setting is stored.
6 Repeat steps 4 and 5 to set the speaker parameters.
7 Press ENTER (A/V amplifier or remote).
xCenter speaker selection (CENTER)
•If you connect a center speaker, select “YES”.
•If you do not connect a center speaker, select “NO”. The sound of the center channel will be output from the front speakers.
xRear speaker selection (REAR)
•If you connect rear speakers, select “YES”.
•If you do not connect rear speakers, select “NO”.
14