Timer-recording radio

programs

To timer-record, you must set the clock (see “Setting the time” on page 17) and preset the radio stations (see “Presetting radio stations” on page 42) beforehand.

1 Tune in the preset radio station (see “Listening to the radio” on page 42).

2 Press CLOCK/TIMER (or CLOCK/TIMER SET on the remote).

“DAILY1 SET” flashes.

3 Press O or o repeatedly to select “REC SET”, then press ENTER (A/V amplifier or remote).

“ON” appears and the hour indication flashes.

4 Set the time to start recording.

Press O or o repeatedly to set the hour, then press ENTER (A/V amplifier or remote). The minute indication flashes.

Press O or o repeatedly to set the minutes, then press ENTER (A/V amplifier or remote).

The hour indication flashes again.

5 Set the time to stop recording following step 4.

The start time appears, followed by the stop time, the preset radio station to be recorded (e.g., “TUNER FM 5”), then the original display appears.

6 Insert a recordable tape into deck B.

7 Turn off the power.

When the recording starts, the volume level is set to the minimum.

To

Do this

 

 

Check the setting

Press TIMER SELECT (or

 

 

CLOCK/TIMER SELECT on

 

 

the remote) and press O or o

 

 

repeatedly to select “REC

 

 

SELECT”, then press ENTER

 

 

(A/V amplifier or remote).

 

 

 

 

 

Change the setting

Start over from step 1.

 

 

 

 

 

Cancel the

Press TIMER SELECT (or

 

Timer-recording

CLOCK/TIMER SELECT on

 

 

the remote) and press O or o

 

 

repeatedly to select “TIMER

 

 

OFF”, then press ENTER (A/

 

 

V amplifier or remote).

 

 

 

 

 

Notes

 

 

 

 

 

 

 

 

Tape

• If the power is on at the preset time, the Timer-

recording does not work.

• When you use the Sleep Timer, the Timer-recording

will not turn on the system until the Sleep Timer turns it off.

• The power turns on 15 seconds before the preset time.

47

MHC-S90D 4-235-983-13(2) GB