Using the Drive on the Cradle

If you carry the drive with you as well as use it with your computer often, using the cradle is extremely convenient. If you connect your computer and the drive through the cradle, you can take the drive with you whenever you want. Then, all you need to do is set the drive on the cradle when you want to use it with your computer – no reconnections necessary.

Preparation

Cradle

1Attaching the ferrite clamp

You need to attach the provided ferrite clamps at both ends of the cradle’s USB cable.

Note

Ferrite clamps serve to reduce the noise generated by cables in compliance with local standards. Make sure that the clamps are properly attached.

Open the extension when setting the drive on the cradle.

Wind once

Close firmly until you hear a click

8 cm

8 cm

Continued

17