Sony MPD-AP20U Limiting the volume (AVLS function), Preventing accidental operation (HOLD function), Trying to raise the volume above the set level

Limiting the volume (AVLS function)

The AVLS function automatically limits the volume to a certain level to avoid sounds that are painfully loud and the potential danger from not being able to hear sounds of your surroundings.

Press the SOUND button repeatedly until “AVLS ON” appears on the remote control display.

Trying to raise the volume above the set level

When the AVLS1) function is active, it is not possible to raise the volume above a certain level.

Appears when you attempt to raise the volume above the set level.

To deactivate the function, press the SOUND button repeatedly until “AVLS OFF” appears on the remote control display.

Note

Using the SOUND and AVLS functions at the same time may distort your music. If so, lower the volume.

1)AVLS: Automatic volume limiter system

Preventing accidental operation (HOLD function)

You can prevent accidental operation of the remote control buttons by using the HOLD function.

Slide the HOLD switch in the direction of the arrow.

Returning the remote control to its normal operation mode

Slide the HOLD switch back to its original position.

Note

“HOLD” does not appear on the remote control display, even when the function is in effect.

48