3 Click [Yes].

The following dialog box opens.

4 Stop the device with the icon ( ) on the taskbar, then disconnect the USB cable from your computer.

5 Click [OK].

The following dialog box opens.

6 Click [Yes].

Your computer restarts.

With a Macintosh computerMac OS 9

To remove the drive from your computer, delete the “MPD-AP20U Bus”, “MPD-AP20U Shim”, “MPD- AP20U USB” system extension installed at the same time as the writing software.

Mac OS X (ver. 10.1)

Because this operating system comes standard with writing software, there is no need to remove the device driver.

Usage Notes

Important precautions

•Never move or lift the drive when it is connected to your computer. Specifically, do not subject the unit to vibrations or physical shocks while writing to a disc.

•Do not use any AC adapter other than the one provided. Using a different adapter could damage the drive.

•Do not bend the USB cable sharply, especially near the connectors. Doing so may damage the cable or cause poor contact.

Operation and storage conditions

Avoid using or storing the drive in a hot or humid environment, or where it may be subjected to severe vibrations or in direct sunlight.

Operation

Place the drive (or cradle) on a level surface when it is connected to your computer.

Shipping

•Keep the packing materials. They may be necessary if you ever need to ship the drive.

•Before shipping the drive, be sure that there is no disc in the drive.

Miscellaneous

Continued

55