Sony MZ-B100 3Select the recording mode, 4Record an MD, zREC, 12-GB, REC MODE, Operation, 1Press zREC, recording pause, up in the display, Connect firmly to

3Select the recording mode.

REC MODE	1 Press REC MODE repeatedly until “STEREO” lights
	up in the display.
	You can select normal stereo, LP2 stereo, LP4 stereo,
	or monaural as the recording mode. For details, see
	“Recording for long times” (page 16). The factory
	setting is normal stereo.
	The recording mode cannot be changed when
	recording is in progress.

4Record an MD.

built-in microphones xSTOP

Connect firmly to i.

REC indicator

zREC

x

Connect firmly to iTo monitor the sound during recording.

1Press zREC.“REC” appears, REC indicator lights up, and then recording starts.

You can monitor the recording conditions, such as the recording position, through the display or the REC indicator (page 26).

If the disc is blank, the recording starts from the beginning. If the disc is partially recorded, the recording automatically starts from the end of the existing material.

To stop recording, press xSTOP.

After you press the xSTOP button to stop the recorder, the recorder will automatically turn off after about 10 seconds (when using an alkaline dry battery) or 5 minutes (when using the AC power adaptor).

Connect the supplied headphones with remote control to the ijack. You can adjust the volume by turning the VOL control. This adjustment does not affect the recording level since the level is adjusted automatically.

To	Operation
Record partway through the	Press NPLAY, >CUE/AMS or .REVIEW/
previous recording	AMS to find the beginning of the material to be
	recorded, and then press XPAUSE.
	Press zREC so that the recorder changes to
	recording pause.
	Press XPAUSE again to start recording.

12-GB