Additional information

PrecautionsOn safetyDo not put any foreign objects in the DC IN 3V jack.On power sources•Use LR6 (size AA) batteries, house current, or car battery.

•The recorder is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the recorder itself has been turned off.

•If you are not going to use this recorder for a long time, be sure to disconnect the power supply (an optional AC power adaptor, dry batteries, or car battery cord). To remove the AC power adaptor (not supplied) from the wall outlet, grasp the adaptor plug itself; never pull the cord.

On heat build-up

Heat may build up in the recorder if it is used for an extended period of time. In this case, leave the recorder turned off until it cools down.

On installation

•Never use the recorder where it will be subjected to extremes of light, temperature, moisture or vibration.

•Never wrap the recorder in anything when it is being used with the AC power adaptor (not supplied). Heat build-up in the recorder may cause malfunction or damage.

•Never carry the recorder together with a hard object within the supplied carrying pouch. Friction with the object may cause flacking or scratching on the recorder’s painted surface.

On the headphonesRoad safety

Do not use the headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in many areas. It can also be potentially dangerous to play your recorder at high volume while walking, especially at pedestrian crossings. You should exercise extreme caution or discontinue use in potentially hazardous situations.

Preventing hearing damage

Avoid using he headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

Caring for others

Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate of the people around you.

On the MiniDisc cartridge•When carrying or storing the MiniDisc, keep it in its case.•Do not break open the shutter.

•Do not place the cartridge where it will be subject to light, extreme temperatures, moisture or dust.

•Attach the supplied MD label only in the space designated for it on the disc. Do not stick it on any other disc surface.

On cleaning

•Clean the recorder casing with a soft cloth slightly moistened with water or a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene as it may mar the finish of the casing.

•Wipe the disc cartridge with a dry cloth to remove dirt.

•Dust on the lens may prevent the unit from operating properly. Be sure to close the disc compartment lid after inserting or ejecting an MD.

44-GB