Sony MZ-B100 To activate the group mode (Group mode recording), Recording a track into a new group, Recording a track into an existing group, 23-GB, 2 Press zREC

To activate the group mode (Group mode recording)

To record tracks in group mode, you must first turn the group mode on before the start of recording.

1 Press GROUP for 2 seconds or more.“ ” lights up in the display and the group mode turns on.To cancel the group mode, press GROUP for 2 seconds or more again.

Note

The group function setting will be canceled when you eject the MD.

Recording a track into a new group

1 While the recorder is stopped, press GROUP for 2 seconds or more.

“ ” lights up in the display and the group mode turns on.

2 Press zREC.3 Play the source sound.

To stop recording, press x.

The material that was recorded up until x was pressed is entered as a new group.

To record a track into another new group.Turn the group mode off, and then follow steps 1 to 3

Recording a track into an existing group

1 While the recorder is stopped, press GROUP for 2 seconds or more.

“ ” lights up in the display and the group mode turns on.

2 Press GROUP slightly.

“ ” flashes in the display and you can select a group directly (group skip mode) (page 31).

3 Within 5 seconds, press

.REVIEW/AMS or >CUE/ AMS repeatedly until the group you want the track to belong to appears.

4 Press zREC.5 Play the source sound.

Note

The group skip mode turns off automatically in step 3 if nothing is done within 5 seconds. To continue the procedure, do step 2 again.

z

•The track will be added at the end of the group.

•For details on the group skip mode, see page 31.

•To add a track that is playing to a group, stop playing the track first, and then do the procedure from step 4.

•If you select “Group --” in step 2, the recorded material will be automatically stored as “Group01”.

23-GB