Symptom

Cause/Solution

 

 

 

 

The recorder does

• The premastered MD is inserted.

 

not record or edit.

,Replace to the recordable MD.

 

 

• The power source was disrupted during recording or editing.

 

,Rerecord or reedit again.

 

 

 

The zREC

• The batteries have been exhausted or the power sources have been

button does not

disconnected during recording or editing.

 

come up. The lid

,Replace the exhausted batteries with new ones or connect the

does not open.

power source again.

 

 

 

 

No sound comes

• The headphones plug is not firmly connected.

 

through the

,Plug in the plug of the headphones firmly to the remote control.

headphones.

Plug in the plug of the remote control firmly to i.

 

• Volume is too low.

 

 

,Adjust the volume by turning VOL.

 

 

• Dirty plugs.

 

 

,Clean the plug on the end of the headphones cord and the plug

 

on the end of the remote control cord.

 

 

 

An MD is not

• Disc playing stopped before it came to the last track.

played from the

,Press .REVIEW/AMS repeatedly or open and close the lid

first track.

once to go back to the beginning of the disc, and restart playing

 

after checking the track number in the display.

 

 

 

The recorder does

• Repeat play is selected.

 

not play normally.

,Press PLAY MODE repeatedly until the

indication

 

disappears from the display.

 

 

 

Playback sound

• The recorder is placed where it receives continuous vibration.

skips.

,Put the recorder on a stable place.

 

 

• A very short track may cause sound to skip.

 

 

,Try not to create tracks under one second long.

 

 

Sound has a lot of

• Strong magnetism from a television or such device is interfering

static.

with operation.

 

 

,Move the recorder away from the source of strong magnetism.

 

 

Cannot find the

• You pressed XPAUSE after pressing .REVIEW/AMS or

track marks.

>CUE/AMS.

 

 

,Press XPAUSE before pressing .REVIEW/AMS or

 

>CUE/AMS.

 

 

 

The clock loses

• The built-in battery for the clock is weak. Note that the clock may

time or the

gain or lose up to about 2 minutes per month under normal

display flashes.

condition.

 

The recording

,Insert new dry batteries and leave them for about more than two

date was not

hours to charge the built-in battery. After charging, set the clock

stamped onto the

again (page 25).

 

• The clock is not set.

 

disc.

 

 

,Set the clock (page 25).

 

 

 

 

47-GB