To erase a small section of a track

Pause playback at the point where you want to start erasing. Then do steps 1 and 2.

To erase a part of a track

Add track marks at the beginning and the end of the part you want to erase, then erase the part.

To erase the whole disc

Note that once a recording has been erased, you cannot retrieve it. Be sure to verify the contents of the disc you want to erase.

1 Play the disc you want to erase, verify its contents, and then press xSTOP.

2 While the recorder is stopped, pressERASE.“All Erase?” and “PushENTER” appear alternately in the display.

3 Press . or > repeatedly until

“: Erase” flashes in the display, and then press EDIT/ENTER.Track name and “All Erase?” light up and “PushENTER” flashes in the display.4 Press EDIT/ENTER.

“TOC Edit” flashes in the display, and all the tracks will be erased. When erasing is complete, “BLANKDISC” appears in the display.

To cancel erasing,

Press xSTOP.

To erase a group

Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the group before you erase it.

1 Press GROUP for 2 seconds or more.

“” lights up in the display and the group mode turns on.

2 Follow steps 1 and 2 of the procedure described in “Selecting and playing groups (Group skip mode)” (page 31) to check the contents of the group you want to erase. Then press xSTOP.

3 While the recorder is stopped, press EDIT/ENTER, press . or > repeatedly until “EDIT” flashes in the display, and then press EDIT/ENTER again.

4 Press . or > repeatedly until “ : Erase” flashes in the display, and then press EDIT/ENTER.

The group name and “GP Erase?” appear and “PushENTER” flashes in the display. To cancel erasing, press

CANCEL.5 Press EDIT/ENTER again. The group is erased.

z

You can also use the SPEED CONTROL dial to select and then enter the menu. Turn the dial (instead of ./>) to show the menu items one by one and press the dial (instead of EDIT/ ENTER) to enter the selected menu.

40-GB