Sony MZ-B100 48-GB, Symptom, Cause/Solution

Symptom	Cause/Solution
The disc cannot	• The component does not support LP2 stereo or LP4 stereo.
edit on other	,Edit on other component that support LP2 stereo or LP4 stereo.
component.
Momentary noise	• Due to the special digital audio compression technology used in
is heard.	LP4 stereo mode, momentary noise may occur on very rare
	occasions with certain sound sources.
	,Record in normal stereo or LP2 stereo mode.
The group	• While using a disc that has no group information, an attempt was
function (group	made to turn the group mode on (“No Group” appears).
mode/group skip	,Use a disc with a group information.
mode) does not
operate.
The display	• The recorder was disconnected from the power source.
window is not	,Let the recorder sit for a while, or disconnect the power source,
normal.	reconnect it, and then press any of the operating buttons.
The recorder	• The group skip mode is on.
skips tracks when	,The group skip mode automatically turns off if no operation is
you press ./	made for 5 seconds.
>.

48-GB