Sony MZ-B100 Recording with analog (line) input (line cable required), REC, MODE, zREC, 21-GB, to LINE OUT, REC indicator, L (white)R (red), to LINE IN (OPTICAL)

Insert a recordable disc.

Recording with analog (line) input (line cable required)

Connect the recorder with a line cable (not supplied) to make analog recording. The sound will be sent from the connected equipment as analog signal but will be sent recorded digitally on the disc.

CD player, cassette recorder, etc.(source)

to LINE OUTL (white) R (red)

Line cable (RK-G129HG, not supplied)*

REC indicator

REC

MODE

to LINE IN (OPTICAL)

zREC

∗Use the connecting cords without an attenuator. To connect to a portable CD player having a stereo mini-jack, use the RK-G136HG connecting cord (not supplied).

1

2 Press REC MODE repeatedly until “STEREO”, “LP2”, “LP4”, or “MONO” lights up in the display.

For details on the recording mode, see “Recording for long times” (page 16).

3 Press zREC.

“REC” appears in the display, the REC indicator lights up, and the recording starts.

4 Play the source sound.

For other operations on recording, see “Recording an MD right away!” (page 11).

Note

A track mark is added at the point where you press the XPAUSE button again to resume recording while pausing recording; thus the remainder of the track will be counted as a new track.

21-GB