Sony MZ-B100 Setting the clock to stamp the recorded time, and, Press, xSTOP, NPLAY, 25-GB, Repeat step, Use a pointed object, PLAY to enter the year

When you press NPLAY to enter the minute, the clock starts operating.

The digit of the month flashes.

Press NPLAY to enter the year.

3

4 Repeat step 2 and 3 to enter the current month, date, hour, and minute.

1 Press CLOCK SET at the button of the recorder.

Use a pointed object.

The digits of the year flash.

01y 1m 1d 12:00am

Clock

2 Change the current year by pressing

. or >.

To change the digits rapidly, keep pressing . or >.

Setting the clock to stamp the recorded time

To stamp the date and time on the MD when you record, you first need to set the clock.

If you make a mistake while setting the clock

Press xSTOP, and set the clock again from step 1. You can skip a step by pressing NPLAY.

To display the current timeWhen the recorder is not operating or while recording, press DISPLAY

xSTOP

NPLAY

./>

CLOCK SET (bottom)

repeatedly until the current time appears in the display.To display the time in the 24- hour system

While setting the clock, press XPAUSE. To display the time in the 12-hour system, press XPAUSE again.

z

You can also use the SPEED CONTROL dial to set the clock. Turn the dial instead of ./> in step 2, and press the dial instead of NPLAY in step 3.

Notes

•Make sure the time is correctly set if you want the time stamp to be accurately recorded for an important recording.

•Under normal conditions, the clock may vary by about plus or minus 2 minutes per month.

25-GB