6. OVERALL ADJUSTMENT MODE
6-1. Operation of The Overall Adjustment Mode
1.Enter the test mode (Display Check mode).
2.Press the
Display of the remote commander
000
AdjF**
Disc mark:
Lit the inner segments: Completed the power supply adjustment.
Lit the outer segments: Completed the check of charge function.
“**”:
If “DF” or “FF” is displayed, it mean that completed the servo overall adjustment.
3.To quit the Overall Adjustment mode, press the x key and return to the Display Check mode.
Flow of overall adjustment mode:
Overall Adjustment Mode
000
AdjF**
CD Overall Adjustment Mode
| [FR] key | *** | ||
|
|
| CD | Run |
|
| |||
| x key |
| ||
|
| MD1 Overall Adjustment Mode | ||
| [FF] key | *** | ||
|
|
| MD1Run | |
|
|
| ||
| x key |
| ||
|
| |||
| [VOL +] key | *** | ||
|
|
| HM3Run | |
|
|
| ||
| x key |
|
|
| Stray Light Offset Overall | ||
|
| Adjustment Mode | ||
| [VOL | *** |
| |
|
|
| OfsRun | |
|
|
| ||
| x key |
|
|
|
|
| Optical | ||
|
| Check Mode | ||
| [GROUP] key | 000 |
| |
|
|
| OPChk | |
|
| |||
| x key |
|
|
|
|
| Initialize The Adjustment Values | ||
| [T MARK] key | 911 |
| |
|
|
| ResOK? |
|
|
|
| ||
| x key |
|
|
|
|
|
|
|
|
|
|
| (rotation) |
6-2. Error Message in The Overall Adjustment Mode
In the Overall Adjustment mode, if an error occurred, it displays as following table.
Display | Description |
|
|
Close! | Dose not close the lid |
|
|
DfDis! | Unsuitableness disc was inserted |
|
|
NoChg! | Does not finish the check of charge function yet |
|
|
NoTmp! | Does not setting the temperature correction value |
|
|
NotCD! | Does not complete the CD Overall adjustment beforethe |
| MD1 Overall adjustment |
|
|
NotM1! | Does not complete the MD1 Overall adjustment |
| before the |
|
|
NotH3! | Does not complete the |
| before the Stray Light Offset Overall adjustment |
|
|
****NG | Error of item number “****” |
7. SELF-DIAGNOSIS RESULT DISPLAY MODE
This set uses the
Total recording time is recorded as a guideline of how long the optical
Clear the total recording time, if the optical
7-1. Operation of The Self-Diagnosis Result Display Mode
1.Enter the test mode (Display Check mode).
2.Press the [FF]key to activate the
Display of the remote commander
***
$$####
3.To quit the
14