MZ-NH1

3-9. Resume Clear

Procedure:

1.In the test mode (Display Check mode), press the [VOL+] key to enter the Manual mode.

2.Press the [VOL+] key once, press the [FF] key once, press the [VOL--]key once, press the [FF]key once, and press the [VOL+] key twice, press the [FF] key three times to select the item number 1933.

3.Press the X key to resume clear.

4.Press the x key four times and back to the Display Check mode. And remove the lithium-ion battery.

3-10. Releasing The Test Mode

Refer to the “SECTION 4. TEST MODE”.

Note: Once the test mode is activated with this application, the test mode is then activated forcibly by only turning on the power.

After the repair completed, be sure to release the test mode by using this application once more.

20