z

•You cannot pause manually during synchro-recording.

•When there is no sound from the player for more than 3 seconds during synchro- recording, the recorder goes into the standby mode automatically. When the sound comes from the player again, the recorder resumes synchro-recording. If the recorder is kept in the standby mode for 5 minutes or longer, the recorder stops automatically.

Notes

•Do not switch SYNCHRO REC after step 2. Recording may not be done properly.

•When recording in monaural, follow steps 1 and 2 of “Recording in monaural for double the normal recording time” (page 13) before synchro-recording .

Recording from a microphone

Connect a stereo microphone (ECM-717, ECM-MS907, ECM-MS957, etc.; not supplied) to the MIC (PLUG IN POWER) jack.

Stereo microphoneto MIC (PLUG IN POWER)MIC SENS (at the bottom)

1 Select the sensitivity with MIC SENS (at the bottom of the recorder) . Usually, set it to HIGH. When recording loud sounds such as a live concert, set it to LOW.

2 Insert a recordable MD and start recording.

Press and slide REC to the right. “REC” lights up and recording starts. For other operations, see “Recording an MD right away! ” (page 6).

Note

To record from a microphone, you must first disconnect any digital source. If connected, the recorder will not switch to microphone input.

12-EN