3 While observing the level meter in the display, adjust the recording level by pressing +(+) or =(–).

Set the level so that it hits the seventh indicator from the bottom at maximum input level.

.

Level meter
Volume decreases

increases

Note

 

Adjust the recording level while the recorder is in standby mode. You cannot adjust it while recording.

4 Press Pagain to start recording.

To stop recording, press p.

The recording level control is switched back to automatic control.

z

When you record with microphone input, select the sensitivity with MIC SENS (page 12).

Checking the remaining time or the recording positionDISPLAY Record indicator

1 Press DISPLAY while recording or in stop mode. Each time you press the button, the display changes as follows.

Position pointer (shows the current location on the MD)

A

B

While recording

AB

Elapsed time

Track number

Remaining time for

Track number

recording

 

Current time1)

Current date1)

1)Appears only when the clock is set.

14-EN