AB
Elapsed time | Track number |
Remaining time for | Track name1) |
recording |
|
Remaining time | Disc name1) |
after the current |
|
location |
|
Current time2) | Current date2) |
1)Appears only if the track has been labeled.
2)Appears only when the clock is set.
To know the recording conditionThe record indicator lights up or flashes according to the recording condition.
Recording | Record indicator | |
condition | ||
| ||
While recording | lights up | |
| flashes according to | |
| the loudness of the | |
| source while | |
| recording with a | |
| microphone (voice | |
| mirror) | |
Recording standby | flashes | |
Less than 3 | flashes slowly | |
minutes’ recording |
| |
time available |
| |
A track mark has | goes off | |
been added | momentarily | |
|
|
z
If you want to check the playing position or track name while playing, see page 19.
To stamp the date and time on the MD when you record, you first need to set the clock.
=+
(
CLOCK SET(at the bottom)1 Connect the power source.
Use the supplied AC power adaptor.
2 Press CLOCK SET at the bottom of the recorder.
Use a pointed object.
The digits of the year flash.
DATE
AM
3 Change the current year by pressing
=or +.
To change the digits rapidly, keep pressing =or +.