z

•You cannot pause manually during synchro-recording.

•When there is no sound from the player for more than 3 seconds during synchro-recording, the recorder goes into the standby mode automatically. When the sound comes from the player again, the recorder resumes synchro- recording. If the recorder is kept in the standby mode for 5 minutes or longer, the recorder stops automatically.

Notes

•Do not switch SYNCHRO REC after step 3. Recording may not be done properly.

•When recording in monaural, follow steps 1 to 3 of “Recording in monaural for double the normal recording time” (page 20), and then do steps 1 and 3 of synchro-recording.

•Even when there is no recorded sound on the sound source, there may be cases when recording does not pause automatically during synchro-recording due to the noise level emitted from the sound source.

•If a silent portion is encountered for 2 seconds or more during synchro- recording, a new track mark is automatically added at the point where the silent portion ends.

•Synchro-recording cannot be done if the connecting cord is not an optical cable, or if the cable is connected to the MIC (PLUG IN POWER) jack.

•You cannot adjust the recording level manually during synchro-recording.

18-GB