Should any problem persist after you have made these checks, consult your nearest Sony dealer.
Symptom | Cause/Solution |
|
|
The recorder | • Audio sources may not be securely connected. |
does not work | ,Disconnect the audio sources once and |
or works | connect them again (pages 6, 16). |
poorly. | • The HOLD function is turned on (“HOLD” |
| appears in the display when you press an |
| operation button on the recorder). |
| ,Disable HOLD by sliding the HOLD switch |
| in the opposite direction of the arrow |
| |
| • Moisture has condensed inside the recorder. |
| ,Take the MD out and leave the recorder in a |
| warm place with the lid open for several hours |
| until the moisture evaporates. |
| • The rechargeable battery or dry battery is weak |
| (r or “LOW BATT” flashes). |
| ,Charge the rechargeable battery or replace the |
| dry battery (page 51). |
| • The rechargeable battery or dry battery have been |
| inserted incorrectly. |
| ,Insert the battery correctly (page 53). |
| • You pressed a button while the disc indication |
| was rotating quickly. |
| ,Wait until the indication rotates slowly. |
| • When recording digitally from a portable CD |
| player, you did not use AC power or did not |
| disable the |
| |
| • The analog recording was made using a |
| connecting cord with an attenuator. |
| ,Use a connecting cord without an attenuator |
| |
|
|