Connect the i1 (or i2) jack of the recorder to the LINE IN jacks of an amplifier or a tape player with a line cable
Stereo |
| |
(not supplied) | Portable DAT | |
|
| |
|
| recorder, etc. |
| R (red) | to LINE IN |
|
| |
to i1 (or i2) |
| Stereo system, |
| etc. | |
L (white) |
| |
(not supplied) |
|
2 phono plugs
When connecting a line cable (not supplied) to the i1 (or i2) jack of the recorder, be sure to set the “BEEP” setting to “BEEP OFF”. This keeps the beep sound out of the recorded signal or the output from the externally connected equipment.
1 Press ENTER, press >MENU.repeatedly until “BEEP” flashes in the display, and then press ENTER again.
2 Press MENU.repeatedly until “BEEP OFF” flashes in the display, and then press ENTER.