Error | Meaning/Remedy |
message |
|
|
|
Hi DC in | • Voltage of the power supply is too high (The |
| supplied AC power adaptor or the recommended |
| car battery cord is not used). |
| ,Use the supplied AC power adaptor or the |
| recommended car battery cord. |
|
|
HOLD | • The recorder is locked. |
| ,Slide HOLD against the arrow to unlock the |
| recorder (page 35). |
|
|
LOW BATT | • Batteries are weak. |
| ,Charge the rechargeable battery or replace the |
| dry battery (page 51). |
|
|
MEM OVER | • You tried to record with the recorder placed where |
| it receives continuous vibration. |
| ,Put the recorder on a stable place, and start |
| recording again. |
|
|
NO COPY | • You tried to make a copy from a disc that is |
| protected by the Serial Copy Management |
| System. You cannot make copies from a digitally |
| connected source which was itself recorded using |
| digital connection. |
| ,Use analog connection instead (page 16). |
|
|
NO DISC | • You tried to play or record with no disc in the |
| recorder. |
| ,Insert an MD. |
|
|
NO SIGNAL | • The recorder could not detect digital input |
| signals. |
| ,Make sure that the source is connected firmly |
| |
|
|
P/B ONLY | • You tried to record or edit on a premastered MD |
| (P/B stands for “playback”). |
| ,Insert a recordable MD. |
|
|
PROTECTED | • You tried to record or edit on a MD with the tab in |
| the |
| ,Slide the tab back (page 56). |
|
|