While holding down X, slide REC to the right. The recorder stands by for recording.
Adjusting the recording level manually (Manual recording)
When you record, the sound level is adjusted automatically. If necessary, you can set the level manually.
./> >MENU.
ENTER
X
REC
Note
Adjust the recording level while the recorder is in standby mode. You cannot adjust it while recording
1
2 Press ENTER, press >MENU.repeatedly until “RecVolume” flashes in the display, and then press ENTER again.
3 Press >MENU.repeatedly until “ManualREC” flashes in the display, and then press ENTER.
ManualRec
To switch back to the automatic control, Press >MENU. repeatedly until “Auto REC” flashes in the display, and then press ENTER.
4 Play the source.
continued