Messages
If the following error messages flash in the display window, check the chart below.
Error | Meaning/Remedy |
message |
|
|
|
BLANKDISC | • An MD with no recording on it is inserted. |
| ,Insert a recorded MD. |
|
|
DISC ERR | • The disc is damaged or does not contain proper |
| recording or editing data. |
| ,Reinsert the disc. If this fails, rerecord. |
|
|
DISC FULL | • There is no more space to record on the disc (less |
| than 12 seconds available). |
| ,Replace the disc. |
|
|
Data Save | • The MD player is recording information (sounds) |
| from the memory to the disk. |
| ,Wait until this process is completed. Do not |
| expose the player to any physical shock, nor |
| disrupt power supply. |
|
|
TOC Edit | • The MD player is recording information (track |
| start and end position) from the memory to the |
| disk. |
| ,Wait until this process is completed. Do not |
| expose the player to physical shock, nor |
| disrupt power supply. |
|
|
BUSY | • You tried to operate the recorder while it was |
| accessing the recorded data. |
| ,Wait until the message goes out (in rare cases, |
| it may take |
|
|
NAME FULL | • You tried to enter more than 200 letters to label a |
| single track or disc. |
| • You tried to enter a total of more than 1700 letters |
| for track or disc names during playback or stop. |
| ,Enter the characters within the limit. |
|
|