On the lid of the battery compartment

The lid of the battery compartment is designed to detach from the main unit when handled with great force. To reattach the lid to the main unit, follow the steps below:

Slots

1

Projections

2

1Place the lid so that the projections on the lid aligned with the slots on the main unit.

2Fit the projection one by one into the slot as shown in the illustration.

Note on mechanical noise

The recorder gives off mechanical noise while operating, which is caused by the power-saving system of the recorder and it is not a problem.

To protect a recorded MD

To record-protect an MD, slide open the tab at the side of the MD. In this position, the MD cannot be recorded or editted. To record again, slide the tab back so the tab is visible.

Back of the MD

Tab

Record-protect

56-GB