Editing recorded tracks
You can edit your recordings by adding/erasing track marks or labeling tracks and MDs. Premastered MDs cannot be edited.
Notes on editing
•Do not move or jog the recorder while “TOC Edit”* is flashing in the display.
•You cannot edit tracks on an MD that is
•If you perform an editing operation while playing, be sure not to turn the power off until “TOC Edit” disappears in the display.
•The lid does not open until “TOC Edit” disappears in the display after editing.
∗TOC = Table of Contents
Erasing tracks
To erase a track
Note that once a recording has been erased, you cannot retrieve it. Make sure of the track you are erasing.
>MENU. | >N | |
ENTER | ||
| ||
x . | T MARK | |
ENTER (x) | EDIT |
T MARK
On the recorder
1 While playing the track you want to erase, press ENTER so that “EDIT” flashes in the display, and then press ENTER again.
“
: Name” flashes in the display, and the recorder plays the selected track repeatedly.