Notes on program setting.

•All program settings are lost when the disc is removed from the recorder.

•If the recorder is stopped and left inactive for 5 minutes in the middle of a programming operation, the tracks selected up to that point are entered as the program.

To adjust the sound quality (Digital Sound Preset)See the illustrations in the Japanese text (pages 37 and 38).

You can make adjustments to the sound quality to suit your taste, and then store two sets of these adjustments.

Settings can be stored to the Personal Disc Memory.1Press SOUND on the remote control repeatedly to select “SOUND1” or “SOUND2”.2During playback, press SOUND for 2 seconds or more.

The recorder changes to bass-setting mode. Pressing the SOUND button for 2 seconds again changes the recorder back to treble-setting mode.

3Turn the control on the remote control towards . or towards N> repeatedly to adjust the bass or the treble.

Pressing the SOUND button for less than 2 seconds toggles the display between “SOUND1” and “SOUND2”. When you press SOUND for a short time while adjusting bass or treble, the setting for that sound is entered and the display switches to the other sound setting.

The sound can be adjusted in 8 steps (– 4, –3, ...±0, ...+2, +3).4Press RPT/ENT .The sound settings are saved and the playback display appears again.To select a preset sound

Press the jog lever (L), flip the lever until “SOUND1” or “SOUND2” flashes or nothing appears in the display, and then press the lever again.

84

Factory settings of the Digital Sound PresetFactory settings of the Digital Sound Preset are the followings:•“SOUND1”: bass +1, treble ±0•“SOUND2”: bass +3, treble ±0

Notes

•You cannot set the Digital Sound Preset with the recorder.

•Digital Sound Preset becomes inoperative when the “AUDIO OUT” parameter for the i/LINE OUT jack is set to “LINE OUT”. In this case, set the “AUDIO OUT” to “HeadPhone” (page 77).

•Sound distortion may occur when you use Digital Sound Preset. In this case, lower the volume or change the settings.

•Changing to another Digital Sound Preset during a recording operation will not affect the quality of recorded sound.

To change playback speed (Speed Control)See the illustrations in the Japanese text (page 39).

The playback speed can be adjusted in 7 steps (80%, 85%, ...100%, 105%, 110%). Setting can be stroed to the Personal Disc Memory.

1Press DISPLAY on the remote control for 2 seconds or more during playback.

2Turn the control on the remote control towards . or towards N> until “SPEED” flashes in the display, and then press x on the remote control. The recorder changes to speed-setting mode.

3Turn the control towards . or towards N> to select the playback speed.

“+” shows the normal speed and the cursor shows the playback speed you are selecting.

4Press x to set the playback speed. “S” appears in the display when the speed is changed.

Notes

•You cannot change playback speed with the recorder.

•The playback sound will be affected by the playback speed.

•All settings will be lost when you remove the disc from the recorder.