Using a MD Walkman connected to the computer

Problem

Cause/Remedy

 

 

Your computer does not

The MD Walkman is not firmly connected with the

recognize the MD Walkman.

supplied dedicated USB cable to the computer.

 

tReconnect the MD Walkman to the computer firmly.

 

tRemove and reconnect the MD Walkman. If the

 

computer still does not recognize the MD Walkman,

 

disconnect the cable, restart the computer, and then

 

make the connection again.

 

A disc is not inserted in the MD Walkman.

 

tCheck if a disc is inserted in the MD Walkman.

 

The Net MD driver is not be installed.

 

tInstall the SonicStage/MD Simple Burner software

 

using the supplied CD-ROM.

 

The software installation failed.

 

tDisconnect the connected device and install the

 

software again using the supplied CD-ROM.

 

The supplied dedicated USB cable is disconnected.

 

tConnect the supplied dedicated USB cable firmly.

 

The connections are made through a USB hub.

 

tOperations are not guaranteed for USB-hub

 

connections. Connect the MD Walkman directly to

 

the USB connector on the computer.

 

 

Even though the dedicated

It takes time to recognize SonicStage.

USB cable is used to connect

tPlease wait.

the MD Walkman to the

The other application software is running.

computer, the display on the

tReconnect the supplied dedicated USB cable after a

MD Walkman does not indicate

while. If the computer still does not recognize the

it is connected.

MD Walkman, disconnect the MD Walkman, restart

 

 

the computer, and connect the dedicated USB cable

 

again.

 

 

Even though your computer

The supplied dedicated USB cable is disconnected.

recognize the MD Walkman, it

tConnect the supplied dedicated USB cable firmly.

does not operate normally.

The connections are made through a USB hub.

 

tOperations are not guaranteed for USB-hub

 

connections. Connect the MD Walkman directly to

 

the USB connector on the computer.

 

 

112