1Select and pause the sound source to be recorded.
PAUSE
Connected component
3While the recorder is stopped, press and hold REC (+B)/T MARK and press NENT on the recorder.
“REC” lights up and recording starts.
REC (+B)/T MARK
NENT
2Make sure that disc indication has stopped rotating in the display window on the recorder.
Make sure that disc indication has stopped.
4Play the source you want to record.
If you insert a previously recorded disc, the recording starts after the existing contents.
Track marks are automatically added at the same point as the sound source, and the contents are recorded together as a group.
PAUSE
Connected component
To | Press |
|
|
Stop | Press x. |
|
|
Pause | Press X1). |
| Press X again to resume recording. |
|
|
Remove the disc | Press x and open the lid. (The lid does not open while |
| “SYSTEM FILE WRITING” flashing in the display.) |
|
|
1)A track mark is added at the point where you press X again to resume recording while pausing; thus the remainder of the track will be counted as a new track.
20