Functions1)

Operations

To insert a blank

Press REC (+B)/

space.

T MARK and press

 

the 5-way control key

 

towards > at the

 

same time.

 

 

To delete a letter.

Press REC (+B)/

 

T MARK and press

 

the control key

 

towards . at the

 

same time.

 

 

To cancel labeling.

Press x for 2 seconds

 

or more.

 

 

To move the cursor

Press the 5-way

from the letter

control key towards

input area to the

VOL –.

character palette.

 

 

 

To move the cursor

Press x.

from the character

 

palette to the letter

 

input area.

 

 

 

To display “_

Press X.

(space)”, “:”, “/”

 

or “–” at the input

 

position in the

 

letter input area.

 

 

 

To switch between

Press X.

capital letters and

 

small letters.

 

 

 

1)Functions of the buttons or the control may differ depending on when the cursor is in the letter input area or in the character palette.

5 Repeat step 4, and then enter all characters of the label name.

6 Press NENT for 2 seconds or more to enter the title.

Note

When the recording is stopped or the recording moves on to the next track while labeling titles during recording, the input at that point is entered automatically.

Re-labeling

You can change the titles by doing the procedure for “Labeling” (page 45).

Notes

•The recorder is able to display, but cannot label using Japanese “Katakana” characters.

•The recorder cannot rewrite a disc or track name of more than 200 letters that was created by another device (in MD mode only).

46