Symptom | Cause/Remedy |
|
|
“Advanced” or | • You attempted to do a menu operation for the first time after purchase |
“Simple” is | of the recorder (by pressing the MENU button for 2 seconds or more). |
displayed. | , Select the Menu mode (page 55). |
|
|
Some menu items | • “Menu Mode” is set to “Simple”. |
cannot be displayed. | , Set the “Menu Mode” to “Advanced” to display all the menu |
| items. |
|
|
The recorder does | • The volume is low. |
not work or works | , Turn up the volume. |
poorly. | • No disc is inserted. |
| , Insert a recorded disc. |
| • The HOLD function is turned on (“HOLD” appears in the display |
| when you press an operation button on the recorder). |
| , On the recorder, disable HOLD by sliding the HOLD switch to the |
| opposite direction of the arrow (pages 15, 16). |
| • The lid is not firmly closed. |
| , Close the lid until it clicks. Then slide OPEN to open the lid. |
| • Moisture has condensed inside the recorder (for example, when the |
| recorder has been brought in from a cold place to a warm place). |
| , Take the disc out and leave the recorder in a warm place for several |
| hours until the moisture evaporates. |
| • The dry battery is weak (“LOW BATTERY” flashes or nothing |
| appears). |
| , Replace the dry battery with a new one. |
| • The disc is damaged or does not contain proper recording or editing |
| data. |
| , Reinsert the disc. Rerecord the disc. If the error message still |
| appears, replace it with another disc. |
| • There is a |
| • While operating, the recorder received a mechanical shock, too much |
| static, abnormal power voltage caused by lightning, etc. |
| , Restart the operation as follows. |
| 1 Disconnect all the power sources and the dedicated USB cable. |
| 2 Leave the recorder for about 30 seconds. |
| 3 Connect the power source. |
|
|
The display window | • The recorder was disconnected from the power source. |
is not normal. | , Let the recorder sit for a while, or disconnect the power source, |
| reconnect it, and then press any of the operation buttons. |
|
|
The operation mode | • When using a blank |
of the blank 60/74/ | operation mode set in the “Disc Mode” menu is applied. |
, Use the “Disc Mode” menu to change the operation mode as | |
disc differs from the | desired. |
mode following |
|
formatting or the |
|
mode selected in the |
|
SonicStage |
|
software. |
|
|
|
75