Symptom

Cause/Remedy

 

 

Editing cannot be done.

• The power source has been disconnected or a power outage has

 

occurred during editing.

 

, The editing done to that point is not saved to the disc. Do the

 

editing operation again.

 

 

Non-audio data cannot

• Non-audio data cannot be erased with the Erase function.

be erased.

, Confirm the contents by connecting the recorder to your

 

computer. If it is okay to delete the contents, then perform the

 

Format function (page 53).

 

 

Tracks cannot be

• This is due to the MiniDisc system limitations. When the tracks are

combined.

scattered and the length of each track is short*, you may not be

 

able to combine the tracks.

 

* Combining tracks of the following lengths may not be possible.

 

Hi-MD mode

 

Linear PCM: 9 seconds or less

 

Hi-SP: 8 seconds or less

 

Hi-LP: 32 seconds or less

 

MD mode

 

SP: 12 seconds or less

 

LP2/Monaural: 24 seconds or less

 

LP4: 48 seconds or less

 

• You cannot combine tracks recorded in different recording modes,

 

e.g., a track recorded in stereo and a track recorded in monaural;

 

nor can you combine a track recorded with digital connection and a

 

track recorded with analog connection.

 

 

The disc cannot edit on

• The component does not support Hi-MD.

other component.

, Edit on other component that support Hi-MD.

 

 

72