Message | Meaning/Remedy |
CANNOT SET | • You tried to make the “Time Mark” setting during |
| • You selected “REC Level” while the recorder is not in |
| , Set “REC Level” while the recorder is in |
| • You tried to make the following settings while recording. |
| — Disc Memory |
| — Play mode |
| — Recording mode |
| — Selection of “ :REC” in menu |
|
|
DATA SAVE | • The recorder is writing information to the system file, such as the |
| recorded data or editing information. |
| , Wait until the message disappears from the display. |
|
|
DC IN TOO | • Voltage of the power supply is too high (The recommanded optional AC |
HIGH | power adaptor is not used). |
| , Use the recommanded (optional) AC power adaptor. |
|
|
DISC FULL | • Recording may not be done if the remaining recordable time on the disc |
| is 48 seconds or less. |
| , Replace the disc. |
|
|
• MD Simple Burner is now ready to record an audio CD to the disc in the | |
| recorder using Simple mode (see “Software Operation”). |
|
|
EJECT DISC OK | • The recorder has finished communicating with the computer and it is safe |
| to eject the disc from the recorder or disconnect the dedicated USB cable. |
|
|
END | • The recorder reached to the end of the disc while playing or pressing |
| >. |
|
|
ERROR | • There is an internal malfunction in the system. |
|
ERROR XX • There is an internal malfunction in the system.
,Restart the operation by doing steps 1 to 3 on page 75. If the message appears again, please consult your nearest Sony dealer.
FORMAT | • A disc with a format that the recorder does not support was inserted. |
ERROR DISC | , Insert a disc used in |
| • A disc formatted on the computer was inserted. |
| , When formatting a disc on the computer, make sure to use the |
| SonicStage software. |
GROUP FULL • You tried to create a 256th group on a disc used in
,You can create only up to 255 groups (on a disc used in
HOLD | • The recorder is locked. |
| , Slide HOLD against the arrow to unlock the recorder (page 16). |
|
|
LOW BATTERY | • Battery is weak. |
| , Replace the dry battery (page 16). |
|
|
MEMORY | • You tried to record with the recorder placed where it receives continuous |
OVER | vibration. |
| , Put the recorder on a stable place, and start recording again. |
77