How to use the supplied clamp filters

When using the recorder connected to the computer, make sure to attach the clamp filters in the way described. (You must attach a clamp filter to comply with the applicable EMC standards.) It is unnecessary to attach the clamp filters if you use the unit without connecting it to the computer.

• For the optional AC power adaptor (AC-ES3010K/AC-E30HG): small-

size clamp filter/ESD-SR-110 (except Mexico model)

• For the optional line cable (RK-G129/RK-G136): small-size clamp filter/

ESD-SR-110 (except Mexcio model).

Approx. 4cm (1.6 in)

Approx.

4cm (1.6 in)

Approx. 4cm (1.6 in)

CD player,

MD player,

 

DVD video

 

player, etc.

To LINE IN

To a digital

(OPTICAL)

(optical)

 

out jack

1 Open the clamp filters.

2 Attach the clamp filters as follows.

For the optional AC power adaptor: Wind the cord around the clamp filter once/ Approx. 4cm (1.6 in.) from the plug and body (see graphic 2-a above).

For the optional line cable: Pass the cord through the clamp filter/Next to the plug connected to the recorder and approx. 4cm (1.6 in.) from the plug connected to an external component (see graphic 2-b above).

3 Close the clamp filter. Make sure the clasps are fully engaged.

13