Other Functions
Transferring Audio Data Back to Your Computer
Audio data can be transferred back to SonicStage “My Library” on your computer.
“Transfer” | “ATRAC Audio Device” |
|
| My Library list | List of tracks on the | ||||||
|
|
|
|
| player | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 Connect the player to your computer (see steps 1 and 2 in “Transferring audio data to the player,” page 14).
2 Click “Transfer” on the right side of the SonicStage window.
The screen is switched to the Transfer window.
3 Select “ATRAC Audio Device” from the Transfer Destination list on the right side of the SonicStage window.
4 Click the tracks you want to transfer to My Library in the Network Walkman list on the right side of the SonicStage window.
To transfer more than one track, hold down the “Ctrl” key while selecting the tracks. To transfer all tracks of the album, click the album.
5 Click 
on the SonicStage window.
Transfer of the tracks selected in step 4 starts.
You can check the transferring status on the SonicStage window.
To stop transferring
Click 
on the SonicStage window.
To remove the USB adaptor from the player
While pressing the gray buttons on both sides, push the USB adaptor inward, and then pull it outward.
Notes
•Tracks transferred to the player from another computer cannot be transferred to My Library on your computer.
•Do not disconnect the USB cable or the USB adaptor while the data is being transferred. If you do, the data being transferred may be destroyed.
